Feature:
Minimise coolant spills onto your workshop or garage floor using this filling kit.
Kit comes with a range of radiator adapters, extension, and elbow to suit a wide range of vehicles.
Made from heavy-duty plastic.
Great for assisting in bleeding air out of cooling systems.
What makes this funnel performs so well is the small center bleed tube that runs up through the center plug handle, this allows air to escape during fill greatly reducing the chances of burping and improves air purging from the cooling system.

Specification:
Type: Proof Coolant Funnel
Color: White + Yellow
Size: As shown
Sub-type: Coolant Filling Funnel Kit
Weight: 0.4kg

Usage:
First install the correct sized adapter into the correct cap. Place the gasket in a downward position. Tighten the cap with an adaptor to make sure it doesn’t leak.
If a 45° elbow or extension is needed, place the funnel after the elbow or extension is placed well into the adapter opening.
Fill funnel slowly and carefully with coolant about 1/3 full.
When running the engine with a funnel attached, the fluid level should be at a low position. Keep RPM in idle position. (Shut down the engine if notice the fluid level rise excessively. Wait for the fluid level to go lower before restarting the engine.)
Use Fluid Stopper for the remaining fluid inside the funnel to flow to the radiator hose by squeeze it and release.
After finish, remove the funnel ( and or extension/elbow) & adapter, close the radiator with cap tightly.

Parcel content:
1x Lid
1x Funnel
1x 45 Degree Elbow x 2
1x Fluid Stopper
1x 5 inches Straight Extension
1x Large Cap A
1x Medium Cap B
1x Small Cap C
1x Threaded Cap D
1x Large Adapter A with Gasket
1x Medium Adapter B with Gasket
1x Small Adapter C with Gasket
1x Threaded Cap Adapter D with Gasket for GM
1x Threaded Cap Adapter E with Gasket for Ford

Related Collections:
Auto Accessories, Automotive, Tools & Automotive